swegltek USB A to Micro B Active Optical Cable with Locking Screws | 5–30m
Short description
Connect compatible USB equipment across your workspace with the swegltek SSMB-3000 USB A to Micro B active optical cable. The hybrid optical cable combines a USB-A host connector with a locking USB 3.0 Micro-B device connector. Choose lengths from 5 to 30 meters for compatible machine-vision cameras, storage equipment and industrial peripherals. Confirm the power arrangement and interface requirements before ordering.
Key features
- Long-distance USB connection: 5–30m length options for cable routes between a host computer and compatible peripherals.
- Up to 10Gbps stated cable data rate: as listed in the product specification. Actual throughput depends on the host, device and application.
- Locking Micro-B device connector: two retaining screws secure the plug to matching device mounting points.
- Hybrid active optical construction: optical data transmission combined with copper conductors for the specified power arrangement.
- 5.5mm nominal cable diameter: allow adequate routing space and connector clearance during installation.
- Windows, macOS and Linux support: connected devices may require their own drivers and software.
- USB 3.0 only: do not select this cable for USB 2.0 or USB 1.1 equipment.
Place equipment where it is needed
A camera or peripheral does not always belong next to its computer. This long USB A to Micro B cable supports installations where the equipment position and cable route require more distance. Match it to a compatible USB 3.0 Micro-B device and plan the route before choosing a length.
A locking connection for compatible devices
The wide USB 3.0 Micro-B male connector has two retaining screws. Check the device's socket, screw thread, mounting-point spacing and surrounding clearance. The host end uses a straight USB-A male plug in a slim black housing.
Optical data transmission with a defined power setup
The SSMB-3000 is a hybrid active optical cable. Its power configuration must be matched to the equipment and cable length. The specification lists host-side auxiliary power for the stated device supply of up to 5V / 800mA at 10m, 20m and 30m. Confirm the approved supply method and accessories before installation. Confirm the power budget for the selected length, including the 15m version.
Length options
5m, 7.5m, 10m, 15m, 20m, 25m and 30m. Measure the installed route rather than the direct distance between devices, and leave room for both connector housings.
Specifications
| Item | Detail |
|---|---|
| Brand | swegltek |
| Model | SSMB-3000 |
| Cable type | USB-A to Micro-B hybrid active optical cable |
| Host connector | Straight USB-A male |
| Device connector | USB 3.0 Micro-B male with two locking screws |
| Maximum stated data rate | Up to 10Gbps per product specification |
| Supported interface | USB 3.0 only |
| Length options | 5–30m |
| Cable diameter | 5.5mm nominal |
| Operating systems | Windows, macOS, Linux |
| Operating temperature | 0–50°C |
| Storage temperature | −20–70°C |
| Humidity | 10–85%, non-condensing |
| Nominal supply voltage | 5V; recommended 4.75–5.25V |
| Device supply noted in source | Up to 5V / 800mA at 10m, 20m and 30m, with host-side auxiliary supply |
| Other lengths and accessories | Confirm power capability and required accessories before ordering |
Installation
Connect USB-A to the host and Micro-B to the matching device. Confirm the required auxiliary supply and the peripheral's own power requirements. If a compatible downstream hub is used, the specification requires a separate supply for that hub. Secure the locking screws only to matching mounting points. Test recognition, transfers and power before final cable routing.
FAQ
Is this ordinary Micro-USB?
It uses the wide USB 3.0 Micro-B connector. Check the actual socket and mounting points; the narrower USB 2.0 Micro-B socket is not the specified connection.
Does it work with USB 2.0 or USB 1.1?
The ordering information specifies USB 3.0 only. Do not purchase it for legacy USB 2.0 or USB 1.1 equipment.
Is it powered entirely by the host USB port?
Do not assume so. The specification calls for host-side auxiliary power for its stated device supply and also references self-powered equipment. Contact swegltek with the device model and cable length to confirm the correct power setup.
Is 800mA available at every length?
The supplied power entry explicitly covers 10m, 20m and 30m. Confirm the supply arrangement and output capability for the selected cable length before ordering.
Can I use a hub?
Use only a compatible hub and check the complete device chain. The specification requires the downstream hub to have its own power supply.
Is this suitable for continuous motion?
The source describes a drag-chain jacket, but installation-specific bend radius, travel, speed and test conditions are not supplied. Confirm the mechanical requirements before using it in a moving cable carrier.
What is included?
One SSMB-3000 USB-A to locking Micro-B active optical cable in the selected length. Power accessories and equipment shown in the images are not confirmed as included.
$109.00
In StockFree Shipping Over $49
30-Day Return
2-Year Warranty
24/7 Support
Product Details
Everything you need to know about this product.
Extend USB-C Video to a DisplayPort Display
The swegltek SCTD-1200 USB-C to DisplayPort active optical cable connects a compatible USB-C video
source to a DisplayPort monitor, projector or professional display. Its integrated cable design provides a
direct display connection for equipment layouts that need more distance between the source and screen.
4K Video at 60Hz
Support for video up to 4K at 60Hz makes this USB-C to DP cable suitable for clear presentations, digital
signage and professional visual content. The supported resolution and refresh rate depend on the source,
display and complete system configuration.
DisplayPort 1.2 Optical Transmission
With DisplayPort 1.2 support and link bandwidth up to 21.6Gbps, this active optical cable uses fiber for
high-speed signal transmission along the cable run. The bandwidth rating describes the DisplayPort link;
this product is intended for display connectivity.
Length Options from 5m to 50m
Choose a 5m, 7.5m, 10m, 15m, 20m, 25m, 30m, 35m, 40m, 45m or 50m USB-C to DisplayPort cable to suit
the installation route. Allow for cable routing, connector access and equipment position when selecting
your length. Contact swegltek for project quantities or other length requirements within the 5–50m range.
Designed for Professional Display Installations
Conference rooms: connect compatible USB-C presentation sources to DisplayPort displays.
Digital signage: place compatible media source equipment farther from the screen.
Workstations: position the computer away from the display area.
AV installations: plan longer point-to-point video and audio cable routes to compatible DP equipment.
Check Your USB-C Video Output
Connect the USB-C end to a source that supports DisplayPort Alt Mode and the DisplayPort end to the
display input. A USB-C connector alone does not guarantee video output. Confirm source and display
compatibility, installation direction and power requirements before ordering.
Product Specifications
Technical specifications and product details.
| Model | SCTD-1200 |
|---|---|
| SCTD-1200Product type | USB-C to DisplayPort Active Optical Cable |
| Connectors | USB-C Male to DisplayPort Male |
| DisplayPort standard | DP 1.2 |
| Link bandwidth | Up to 21.6Gbps |
| Video | Up to 4K at 60Hz |
| Length range | 5–50m |
| 5–50mSignal source | USB-C with DisplayPort Alt Mode |
| Destination | Compatible DisplayPort display input |
FAQS
Find answers to the most common questions about our products, shipping, returns and support.
No. Its plug projects at 90° to the housing and cable axis, as shown.
Check the device interface, port recess, nearby connectors and required cable exit direction.
This listing describes USB data connectivity. USB-C video output and high-wattage laptop charging are not specified.
One cable in the selected length. Devices shown are for illustration.
Standard options cover 5m to 50m. Contact swegltek with your installation route and required length for other project options.
